Seagate Video 3.5 HDD Product Manual, Rev. A 5
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following:
Seagate
®
Video 3.5 HDD SATA model drives:
These drives provide the following key features:
• 5900 RPM spindle speed
• High instantaneous (burst) data-transfer rates with a default of 6Gb/s.
Limit settings for 1.5Gb/s and 3.0Gb/s are available via S.M.A.R.T. Command Transport command.
• Support for S.M.A.R.T. drive monitoring and reporting
• Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology,
for increased areal density
• State-of-the-art cache and on-the-fly error-correction algorithms
• Native Command Queuing with command ordering to increase performance in demanding applications
• Full-track multiple-sector transfer capability without local processor intervention
• Quiet operation
• Compliant with RoHS requirements in China and Europe
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Supports latching SATA cables and connectors
• Worldwide Name (WWN) capability uniquely identifies the drive.
• Supports Trusted Send/Receive Security Protocol
• Reliability for 24×7 video applications
• Supports ATA8 streaming commands
• Supports power-up in the standby feature
• Supports Trusted Send/Receive Security Protocol
• Performance-tuned for seamless video applications
• Built-in error recovery for non-stop video streaming
• Best-in-class acoustic performance means virtually silent operation
• Enhanced caching capabilities enable superior video recording quality.
ST1000VM002
To Next Page
Loading...
