Need help?Do you have a question about the Seagate SV35 Series and is the answer not in the manual?
Explains advantages of SATA over parallel ATA, focusing on plug-and-play and cabling.
Provides quick reference tables for drive specifications.
Details formatted capacity, guaranteed sectors, and bytes per sector for drive models.
Lists default logical geometry parameters like cylinders, heads, and sectors per track.
Outlines recording methods, density, areal density, and data transfer rates.
Details physical dimensions such as height, width, length, and weight.
Explains seek time measurements, including track-to-track and average seek times.
Specifies time taken for the drive to become ready from power-on or standby states.
Covers DC power requirements, conducted noise, voltage tolerance, and power management modes.
Details ambient temperature, temperature gradient, humidity, altitude, shock, and vibration specifications.
Describes acoustic measurements, including sound power levels and test methods.
Lists radio frequency environments and performance levels for EMC immunity.
Covers Annualized Failure Rate (AFR) and how to determine product warranty.
Details safety and electromagnetic compatibility certifications like UL, CSA, EN, FCC, and C-Tick.
Discusses compliance with environmental regulations like EU and China RoHS directives.
Advises on precautions for exposing drives to corrosive environments and contaminants.
Provides essential precautions for handling drives to prevent electrostatic discharge (ESD) damage.
Explains the point-to-point SATA interface and configuration, noting no master/slave setup.
Describes SATA interface cables, connectors, and their keying for proper orientation.
Details drive mounting procedures, screw types, torque, and clearance requirements.
Discusses the drive's ability to be hot-plugged according to SATA Revision 2.5.
Summarizes the pin definitions for SATA signal and power connectors.
Lists standard ATA commands supported by the drive, including Identify Device, Set Features, and S.M.A.R.T. commands.
General| Interface | SATA 6Gb/s |
|---|---|
| Storage Temperature | -40°C to 70°C |
| Annualized Failure Rate (AFR) | 0.44% |
| MTBF | 1, 000, 000 hours |
| Warranty | 3 years |
| Capacity | 1TB, 2TB, 3TB, 4TB |
| Form Factor | 3.5 inch |
| Cache | 64MB |
| Operating Temperature | 0°C to 70°C |
| Operating Shock | 70G |
| Non-Operating Shock | 300G |
| Power Requirements | 12V, 5V |
To Next Page
