EasyManua.ls Logo

Seagull Models AT-6 TEXAN User Manual

Seagull Models AT-6 TEXAN
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Made in Vietnam.
Specifications:
Wing span-------------------------------------------------- 62.9 in--------------------------------------- 159.8cm.
Wing area--------------------------------------------------620sq.in---------------------------------- 40 sq.dm.
Approximate flying weight-----------------------------6.2-7.7 lbs---------------------------2.8kg - 3.5kg.
Length------------------------------------------------------ 43.6in---------------------------------------- 110.8cm.
Recommended engine size--------------------------.40 - .52cu.in--------------------------------- 2-stroke.
------.72 - .82 cu.in-------------------------------- 4-stroke.
ELECTRIC CONVERSION : OPTIONAL.
Recommended R/C --------------------------------------------- 4 channels with 6 servos.
Flying skill level ---------------------------------------------------- Advanced/Intermediate.
Kit features.
Ready-made—minimal assembly & finishing required.
Ready-covered—including decals, trim & covering.
Factory-installed pushrod.
Photo-illustrated step-by-step Assembly Manual.
MS:110
“Graphics and specifications may change without notice”.
ASSEMBLY MANUAL
Question and Answer IconNeed help?

Do you have a question about the Seagull Models AT-6 TEXAN and is the answer not in the manual?

Seagull Models AT-6 TEXAN Specifications

General IconGeneral
BrandSeagull Models
ModelAT-6 TEXAN
CategoryToy
LanguageEnglish

Summary

Specifications

Parts Listing

Fuselage Assembly

Lists the components required for the fuselage section of the assembly.

Hinging the Ailerons

Hinging the Rudder

Hinging the Elevators

Aileron Control Horn

Elevator Control Horn

Rudder Control Horn

Servo Gear Installation

Pushrod Installation

Wing Assembly

Engine Mount Installation

Installing the Stopper Assembly

Installing the Battery

Mounting the 4-Stroke Engine

Mounting the 2-Stroke Engine

Electric Conversion

Installing the Aileron Servos

Fuselage Servos Installation

Installing the Horizontal Stabilizer

Installing the Vertical Stabilizer

Elevator - Rudder Pushrod Installation

Wing-Fuselage Attachment

Installing the Receiver

Balancing

Control Throws

Flight Preparation

Preflight Check

Related product manuals