Seagull Models Husky - Page 19

19
www.seagullmodels.com
9) Set the aileron hatch in place and use a
Phillips screw driver to install it with four wood
screws.
AILERON PUSHROD HORN INSTALLATION
M2 lock nut.
M2 clevis.
60mm.
Wing.
Aileron.
M2 lock nut.
M2x10mm
INSTALLING THE FLAP SERVO
Repeat the procedure for the aileron servo.
M2 lock nut.
M2 clevis.
Wing.
Flag.
M2 lock nut.
50 mm