EasyManua.ls Logo

Seagull Models SPARROW HAWK 62 CC User Manual

Seagull Models SPARROW HAWK 62 CC
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Made in Vietnam.
ASSEMBLY MANUAL
MS: SEA 68
“Graphics and specfications may change without notice”.
Kit features.
Ready-made—minimal assembly & finishing required.
Ready-covered covering.
Photo-illustrated step-by-step Assembly Manual.
Specifications
Wingspan--------------------------------------85.4 in------------------------------ 216cm.
Wing area------------------------------------ 1371 sq.in-------------------- 88.5 sq.dm.
Approximate flying weight---------------- 19 lbs--------------------------------- 8.6kg.
Length----------------------------------- ------ 71.5in------------------------------- 181cm.
Recommended engine size-------------------------------- 62cc Gasoline Engine.
Radio System required 4 channels with 6 digital servos/karbonite or metal
gear.
Flying skill level Intermediate/advanced.
Item code : SEA 68.
Question and Answer IconNeed help?

Do you have a question about the Seagull Models SPARROW HAWK 62 CC and is the answer not in the manual?

Seagull Models SPARROW HAWK 62 CC Specifications

General IconGeneral
BrandSeagull Models
ModelSPARROW HAWK 62 CC
CategoryToy
LanguageEnglish

Summary

Model Specifications

Technical Specifications

Detailed technical specifications of the model, including dimensions and requirements.

Introduction and Safety

Critical Safety Warning

Crucial safety warning regarding the model's operation and user responsibility.

Control Surface Hinging

Hinging the Ailerons

Detailed steps for securely gluing the aileron hinges using C/A glue.

Hinging the Elevator

Instructions for gluing the elevator hinges using the same method as ailerons.

Hinging the Rudder

Instructions for gluing the rudder hinges using the same method as ailerons.

Servo Installation

Control Horn Installation

Pushrod and Gear Installation

Landing Gear Installation

Wing and Landing Gear Assembly

Wing Assembly

Critical steps for joining the wing halves using epoxy and a reinforcing brace.

Engine Mounting

Engine Installation Preparation

Guide for preparing and marking the firewall for engine mounting.

Mounting the Engine

Steps for installing the engine using pushrod housing and mounting bolts.

Fuel System

Servo and Cowling Installation

Cowling Fitting

Control Horns and Fin Assembly

Control Systems and Tail Wheel

Final Assembly and Flight Preparation

Attaching Wing to Fuselage

Steps for securely attaching the completed wing to the fuselage.

Balancing the Aircraft

Critical procedure for balancing the aircraft at the specified center of gravity.

Preflight Checks

Comprehensive Preflight Checklist

Comprehensive checklist of pre-flight checks for safety and operability.

Product Information and Support

Safety Precautions and Usage

General safety advice and warnings for operating the hobby product.

Related product manuals