Seagull Models Swift 40 - User Manual

Specifications:
Wing span -------------------------------63in (160cm).
Wing area ------------------643.3sq.in (41.5sq dm).
Weight -------------------------5.5-6.2lbs (2.5-2.8kg).
Length --------------------------------45.8in (116.4cm).
Engine ------------------ 0.40-0.55cu.in ----2 stroke.
0.72-0.82cu.in--- 4 stroke.
Radio------------------------4 channels with 4 servos.
Eletric conversion: optional
ASSEMBLY MANUAL
MS:138
“Graphics and specifications may change without notice”.

Summary

Introduction to the Swift40

Warnings and Safety Precautions

Additional Items and Tools Required

Parts Listing

Fuselage Assembly Parts

Components listed for the fuselage assembly section.

Wing Assembly Parts

Components listed for the wing assembly section.

Tail Section Assembly Parts

Components listed for the tail section assembly.

Hinging the Ailerons

Hinging the Elevator

Hinging the Rudder

Wing Assembly

Installing the Aileron Servo Mount

Installing the Aileron Servo

Installing the Aileron Linkage

Installing the Main Landing Gear

Nose Gear Installation

Fuel Tank Installation

Installing Fuselage Servos

Throttle Servo Arm Installation

Installing the Power Switch

Mounting the Engine

Engine Mounting (.46-.55 2-Stroke)

Instructions for mounting .46-.55 2-stroke engines to the airframe.

Mounting the Engine

Engine Mounting (.72-.82 4-Stroke)

Instructions for mounting .72-.82 4-stroke engines to the airframe.

Electric Power Conversion

Installing the Spinner

Horizontal Stabilizer Installation

Vertical Stabilizer Installation

Elevator Pushrod Horn Installation

Rudder Pushrod Horn Installation

Installing the Receiver and Battery

Attachment Wing-Fuselage

Tail-Dragger Conversion

Balancing the Model

Control Throws

Flight Preparation

Preflight Check

Seagull Models Swift 40 Specifications

General

Brand	Seagull Models
Model	Swift 40
Category	Toy
Language	English