Seagull Models SEA238 User Manual

WWW.SEAGULLMODELS.COM
1
ASSEMBLY MANUAL
www.seagullmodels.com
Code: SEA238
Specications:
Wingspan---------------68.9 in (175 cm).
Wing area---------------776.6 sq.in ( 50.1 sq.dm).
Weight-------------------7.7 lbs (3.5 kg).
Length-------------------48.2 in (122.5 cm).
Engine-------------------10cc - 15cc.
Glow engine------------.61 - 2 stroke
Motor size---------------Power 60 ( Electric power)
Radio--------------------4 channels with 5 servos.
Electric conversion: Optional.
“ Graphics and specications may change without notice ” .

Seagull Models SEA238 Specifications

General

Brand	Seagull Models
Model	SEA238
Category	Toy
Language	English

Summary

Hinging the Aileron

Hinging the Elevators

Hinging the Rudder

Installing Control Horns

Aileron Control Horn Installation

Attaching the fiberglass control horn to the aileron using epoxy.

Elevator Control Horn Installation

Attaching the fiberglass control horn to the elevator using epoxy.

Installing Rudder Control Horn

Installing Fuselage Servos

Electrical and Fuel System Setup

Installing Engine Switch

Mounting the engine kill switch into the fuselage.

Installing Receiver Switch

Mounting the receiver power switch into the fuselage.

Installing Fuel Tank Stopper Assembly

Assembling and preparing the fuel tank stopper.

Fuel Tank Installation

Engine Mount Installation

Mounting the Engine

Cowling Installation

Electric Power Conversion

Installing the Spinner

Installing Aileron Servos

Aileron Pushrod Horn Installation

Installing Main Landing Gear

Installing Wheels

Installing the Horizontal Stabilizer

Installing Vertical Stabilizer

Elevator Pushrod Installation

Rudder Pushrod Installation

Tail Bracing Installation

Mounting the Tail Wheel

Install Fiberglass Horn

Pilot and Canopy Installation

Applying Decals

Installing Battery and Receiver

Wing-Fuselage Attachment

Wing Bracing Installation

Balancing the Airplane

Control Throws

Flight Preparation

Preflight Check