To Next PageTo Next Page
Need help?Do you have a question about the Seagull Models SEA 358 and is the answer not in the manual?
General| Brand | Seagull Models |
|---|---|
| Model | SEA 358 |
| Category | Toy |
| Language | English |
Safety advisory regarding the model's potential hazards and user responsibility.
Lists all components included in the model kit for assembly.
Securely attaching ailerons to wing panels using hinges and CA glue.
Attaching control horns to ailerons and mounting servos for aileron control.
Hinging elevators and installing the rudder control horn.
Installing pushrods for elevator and rudder control mechanisms.
Attaching the main landing gear assembly to the fuselage.
Steps for attaching the tail wheel assembly to the aircraft.
Installing tail bracing wires and the model's machine gun.
Installing the fuel tank and its stopper assembly with tubing.
Securely attaching the engine to the firewall using specified hardware.
Guide for adapting the model for electric power system installation.
Procedures for fitting and securing the aircraft's cowling.
Instructions for connecting the wings to the fuselage.
Guide for fitting the wing struts to the airframe.
Guide for fitting the cabane struts to the airframe.
Steps for installing the pilot figure and canopy.
Instructions for applying decorative decals to the model.
Critical steps for achieving proper center of gravity for flight.
Specifies control surface movement ranges for optimal flight.
Essential checks before the first flight for safety and performance.
