1/3 ScaleMorane Saulnier AI
Instruction Manual.
2
ank you for choosing the 1/3 Scale Morane Saulnier AI ARTF by SG MODELS . e
1/3 Scale Morane Saulnier AI was designed with the intermediate/advanced sport yer in
mind. It is a semi scale airplane which is easy to y and quick to assemble. e air-
frame is conventionally built using balsa, plywood to make it stronger than the aver-
age ARTF, yet the design allows the aeroplane to be kept light. You will nd that most
of the work has been done for you already. e motor mount has been tted and
the hinges are pre-installed. Flying the 1/3 Scale Morane Saulnier AI is simply a joy.
is instruction manual is designed to help you build a great ying aeroplane. Please
read this manual throughly before starting assembly of your 1/3 Scale Morane Saulnier AI
Use the parts listing below to indentify all parts.
If you are inexperienced with basic R/C ight we strongly recommend you contact your
R/C supplier and join your local R/C model Flying Club. R/C Model Flying Clubs oer a
variety of training procedures designed to help the new pilot on his way to successful R/C
ight. ey will also be able to advise on any insurance and safety regulations that may ap-
ply.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE
YOU ASSUME ALL RISK & REPONSIBILITY.
INTRODUCTION
WARNING
KIT CONTENTS
2
2 2
1
3
3
5
14
7
6
9
11
12
4
8
10
13
To Next Page
Loading...
