To Next PageTo Next Page
Need help?Do you have a question about the Seagull Models Turbo Raven and is the answer not in the manual?
General| Wingspan | 63 in (160 cm) |
|---|---|
| Weight | 6.6 - 7.3 lbs (3 - 3.3 kg) |
| Length | 55.1 in (140 cm) |
| Radio | 4 channels |
| Skill Level | Intermediate |
Use M4x20mm bolts and washers to secure the landing gear to the fuselage.
Place the engine forward of the firewall with the drive washer at 115mm.
Mark the balance point 145mm back from the wing's leading edge at the root.
Hold the model at the balance point to determine if it is tail-heavy or nose-heavy.
Add weight to the nose or tail as needed to achieve the correct balance point.
Verify that the elevator, rudder, ailerons, and throttle operate correctly and in the right direction.
Confirm elevator moves up when stick is pulled back; reverse servo if necessary.
Confirm rudder moves right when stick is moved right; reverse servo if necessary.
Ensure throttle stick forward opens the carburetor; reverse servo if necessary.
Verify right aileron moves up and left aileron moves down; reverse servo if needed.
Confirm the airplane's balance, especially with an empty fuel tank.
