4.5. FUSE
4.5.1. The charger is equipped with two front panel mounted fuses. The output protection fuse on the left will interrupt the circuit in the
following circumstances:
b) Short circuit - clamps touch, or cross-connection to battery.
c) If the output fuse blows take the following action:
Disconnect the charger from the mains power supply.
Allow the unit to cool down, establish the reason for fuse blowing and correct.
Replace the fuse. DO NOT use a fuse with copper bridge or similar as these will damage your starter
fuses with the charger.
4.5.2.
the same value.
THERMAL PROTECTION
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
WEEE REGULATIONS
waste authority for recycling information.
C
Original Language Version
To Previous Page
Loading...
