EasyManua.ls Logo

Sealey DG5000 - Operation; 5.1. Preparation before Starting; 5.2. Fuel

Sealey DG5000
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DG5000 Issue:1 28/02/23
Original Language Version
© Jack Sealey Limited
5. OPERATION
5.1. 
8 DO NOT exceed individual socket amp ratings.
5.2. 
8 DO NOT rell tank while engine is running or HOT.
8 DO NOT overll the diesel tank and make sure the ller cap is securely closed after refueling.Diesel can expand in hot weather and
overow. Always leaving a 25mm gap above the fuel level.
5.2.1. Take care not to spill fuel when refuelling. If any fuel is spilled, make sure the area is clean and dry before starting the engine.
5.2.2. Wear suitable P.P.E.
5.2.3. Only use standard specication diesel, this can be red or white.
5.2.4. Keep dust and water out of the fuel.
5.2.5. When lling the fuel tank from drums, make sure that no dust or water is mixed in with the fuel. This can cause serious damage to the
fuel injection pump or the injector nozzle.

Engine stop
Run Lever
In emergency
pull down to
stop machine
Dipstick and oil

Oil drain
olt

Access to air

panel
To open
access panel
undo these
four bolts
To access the

nut
Remove

pulling in a
forward
Direction
A

Related product manuals