Sealey MAC04 - User Manual

TYRE INFLATOR/MINI AIR COMPRESSORS 12V
HEAVY DUTY
MODEL NO’S: MAC04, MAC05, MAC06, MAC07
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
 WARNING! Read instructions before use. Suitable for 12V operation only.
 WARNING! This compressor is capable of producing a high pressure. DO NOT inate any item beyond its maximum capacity.
8 DO NOT leave the unit unattended while in operation.
9 Check capacity and maximum pressure of inatable before commencing ination.
9 Monitor the pressure gauge while in operation.
9 The gauge should be used as an indication of pressure only. We recommend the use of a dial pressure gauge for denitive reading.
9 Locate compressor on an appropriate surface for use.
9 The 12V auxiliary plug (MAC04) must not be substituted with any other type of plug or electrical supply.
8 DO NOT direct ination hose connector head at yourself, others or animals.
8 DO NOT carry by the hose, or pull the hose sharply from a valve.
8 DO NOT pull the power cable from the vehicle accessory socket or battery terminal by the power lead.
8 DO NOT get the compressor wet or use in the rain.
8 DO NOT use the compressor for a task it was not designed to perform.
8 DO NOT operate the compressor when you are tired, under the inuence of alcohol, drugs or intoxicating medication.
8 DO NOT operate the compressor if any parts are missing as this may cause failure or possible personal injury.
8 DO NOT open the unit.
9 Keep children and non essential persons away from the ination area.
9 Keep the compressor clean and in good condition.
9 Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the
warranty.
2. INTRODUCTION
A range of heavy-duty mini air compressors with delivery between 25ltr and 95ltr/min. Air output hose features quick release coupling. Suitable for
inflating tyres on lawnmowers, motorcycles, cars, vans and 4x4s and commercial vehicles. Supplied in a storage bag with high pressure hose with
screw-on connector and accessory kit including ball needle and adaptors for inflatables.
3. SPECIFICATIONe
Model No MAC04 MAC05 MAC06 MAC07
Hose length 1500mm 4500mm 7500mm 7500mm
Power cord length 3mtr 3mtr 3mtr 3mtr
Operating voltage 12V 12V 12V 12V
Tyre Ination time
(175/70/R13 tyre)
0-30psi in 139sec 0-30psi in 104sec 0-30psi in 60sec 0-30psi in 45sec
Maximum current 13A 20A 33A 40A
Air delivery 25ltr/min 50ltr/min 75ltr/min 95ltr/min
Power connection Accessory plug Battery clamps Battery clamps Battery clamps
Applications Cars Lawnmowers, motorcycles,
cars, vans
Cars, vans, 4x4s Cars, vans,4x4s
commercial vehicles
Maximum pressure 100psi 150psi 150psi 150psi
Weight 1.85kg 2.91kg 4.65kg 6.58kg
4. OPERATION
 WARNING! Ensure you have read and understood the safety instructions. Place the compressor on a sound, flat surface ensuring that
the inflation air hose can reach the tyre valve.
4.1. Remove the valve cap and screw the air hose onto the tyre valve.
IMPORTANT: Inflation will only be effective if the connector head is fully fitted and secured onto the valve.
MAC04, MAC05, MAC06, MAC07 Issue:2 (H) - 08/03/19
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual

Summary

Safety Precautions

Read and Follow Instructions

Always read and understand all instructions before operating the compressor.

Operational Safety Rules

Follow guidelines for unattended operation, pressure monitoring, and safe handling.

Protect Personnel and Property

Keep children and bystanders away; avoid misuse and damage.

Product Introduction

Product Specifications

Operating Instructions

Pre-Operation Safety Check

Ensure safety instructions are read and understood before operation.

Secure Hose Connection

Ensure the air hose connector head is fully fitted and secured onto the valve for effective inflation.

Connecting to Power Supply

Connect the compressor to the vehicle's power source, noting accessory socket limits or battery clip polarity.

Inflation Process

Start the engine, switch on the compressor, monitor pressure, and switch off when done.

General Information and Troubleshooting

Understand inflation times, check fuses if not starting, and use for various items.

Thermal Cut-Out Feature

Note the thermal cut-out may activate after 30 minutes of continuous use.

Maintenance

Fuse Replacement

Replace fuses only with the same specification as the original.

Inlet Filter Cleaning

Clean the inlet filter with mild soapy water, ensuring it is dry before replacement.

Environmental and Disposal Information

Environment Protection

Recycle unwanted materials and dispose of products and fluids according to local regulations.

WEEE Regulations

Dispose of the product at the end of its working life in an environmentally protective way.

Sealey MAC04 Specifications

General

Model	MAC04
Type	Air Compressor
Maximum Pressure	8 bar
Voltage	230 V
Noise Level	97 dB
Operating Pressure	6-8 bar
Air Consumption	32 L/min
Thread Size	1/4"
Capacity	4 Litres