Sealey SX208 - User Manual

To Next Page

INSTRUCTIONS FOR

LOCKING WHEEL NUT KEY SET 10PC-BMW &

MINI

MODEL NO: SX208

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

 WARNING! DO NOT use the tool if damaged or thought to be faulty.

 WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to

when using tools.

 WARNING! If jacking up a vehicle refer to manufactures instructions for vehicle and jack.

8 DO NOT use the tool for a task it is not designed to perform.

8 DO NOT use worn, or damaged sockets.

8 DO NOT use the tool unless you have been instructed in its use by a qualied person.

8 DO NOT operate the tool if you are tired or under the inuence of alcohol, drugs or intoxicating medication.

9 Maintain the tool in good condition.

9 Follow all workshop safety rules, regulations and conditions.

9 Maintain correct balance and footing. Ensure the oor is not slippery and wear non-slip shoes.

9 Keep children and non essential persons away from the working area.

2. INTRODUCTION

Set of ten locking keys for the removal of locking wheel nuts on BMW and Mini vehicles.

3. CONTENTS

Component Description

SX208.01 Locking Wheel Nut Key. (30/13PT)-BMW

SX208.02 Locking Wheel Nut Key. (31/15PT)-BMW

SX208.03 Locking Wheel Nut Key. (32/16PT)-BMW

SX208.04 Locking Wheel Nut Key. (33/17PT)-BMW

SX208.05 Locking Wheel Nut Key. (34/18PT)-BMW

SX208.06 Locking Wheel Nut Key. (35/19PT)-BMW

SX208.07 Locking Wheel Nut Key. (36/20PT)-BMW

SX208.08 Locking Wheel Nut Key. (37/21PT)-BMW

SX208.09 Locking Wheel Nut Key. (38/22PT)-BMW

SX208.10 Locking Wheel Nut Key. (40/23PT)-BMW

SX208 | Issue 1 04/05/16

Original Language Version

Refer to

Instructions

Need help?

Do you have a question about the Sealey SX208 and is the answer not in the manual?

Summary

Safety Instructions

Safety Precautions

Critical safety warnings, adherence to regulations, and best practices for tool usage and workshop environment.

Introduction

Product Overview

Defines the product as a set of ten locking keys for BMW and Mini vehicles.

Operation

Operating Instructions

Step-by-step guide for selecting the correct key, fitting it, and removing/replacing wheel nuts.

Maintenance

Maintenance Guidelines

Essential advice on maintaining the tool's condition and proper storage after use.

Summary

Safety Instructions

Safety Precautions

Critical safety warnings, adherence to regulations, and best practices for tool usage and workshop environment.

Introduction

Product Overview

Defines the product as a set of ten locking keys for BMW and Mini vehicles.

Operation

Operating Instructions

Step-by-step guide for selecting the correct key, fitting it, and removing/replacing wheel nuts.

Maintenance

Maintenance Guidelines

Essential advice on maintaining the tool's condition and proper storage after use.

The Sealey Locking Wheel Nut Key Set (Model No: SX208) is a specialized tool designed for the removal of locking wheel nuts on BMW and Mini vehicles. This 10-piece set provides a range of keys to accommodate various locking wheel nut patterns found on these car brands.

Function Description:

The primary function of this set is to enable the safe and efficient removal of locking wheel nuts, which are designed to prevent wheel theft. Each key in the set is specifically patterned to match a corresponding locking wheel nut, allowing for proper engagement and subsequent removal or installation. The set is intended for use by qualified personnel or individuals who have been instructed in its proper use, ensuring that the task is performed correctly and without damage to the vehicle or injury to the user.

Important Technical Specifications:

The SX208 set includes ten distinct locking wheel nut keys, each identified by a unique part number and a description indicating its specific pattern. The keys are designed to be used with a 17mm socket plus drive, which is attached to the key for turning. The specific keys included are:

SX208.01: Locking Wheel Nut Key. (30/13PT)-BMW
SX208.02: Locking Wheel Nut Key. (31/15PT)-BMW
SX208.03: Locking Wheel Nut Key. (32/16PT)-BMW
SX208.04: Locking Wheel Nut Key. (33/17PT)-BMW
SX208.05: Locking Wheel Nut Key. (34/18PT)-BMW
SX208.06: Locking Wheel Nut Key. (35/19PT)-BMW
SX208.07: Locking Wheel Nut Key. (36/20PT)-BMW
SX208.08: Locking Wheel Nut Key. (37/21PT)-BMW
SX208.09: Locking Wheel Nut Key. (38/22PT)-BMW
SX208.10: Locking Wheel Nut Key. (40/23PT)-BMW

The "PT" in the description likely refers to the number of points or splines on the key's pattern, indicating its specific design for different locking nuts. The keys are manufactured to a high standard, ensuring durability and reliable performance when used correctly.

Usage Features:

The operation of the SX208 set involves a straightforward process:

Selection: The user must first choose the correct locking wheel nut key that matches the specific locking wheel nut on the vehicle.
Placement: The selected key is then placed over the wheel nut/bolt and rotated until it slots securely into the wheel bolt/nut pattern.
Removal: A 17mm socket plus drive is attached to the key, and the assembly is turned anti-clockwise to remove the wheel bolt/nut.
Installation: To replace the bolt/nut, the removal operation is reversed. It is crucial to use a torque wrench to tighten the wheel nut/bolt to the manufacturer's specified torque settings, ensuring proper and safe wheel attachment.

Safety Precautions:

The manual emphasizes several critical safety warnings and cautions to ensure safe operation and prevent damage or injury:

Inspection: Do NOT use the tool if it is damaged or suspected to be faulty.
Compliance: Adhere to Health & Safety, Local Authority Regulations, and general workshop practice regulations when using tools.
Vehicle Jacking: If jacking up a vehicle, always refer to the manufacturer's instructions for both the vehicle and the jack.
Intended Use: Do NOT use the tool for tasks it is not designed to perform.
Tool Condition: Avoid using worn or damaged sockets.
User Competence: Only use the tool if instructed by a qualified person.
Impairment: Do NOT operate the tool if tired or under the influence of alcohol, drugs, or intoxicating medication.
Maintenance: Maintain the tool in good condition.
Workshop Safety: Follow all workshop safety rules, regulations, and conditions.
Stability: Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Work Area: Keep children and non-essential persons away from the working area.
Jacking Safety: If jacking up a vehicle, refer to the manufacturer's instructions for the vehicle and jack.

Maintenance Features:

Maintaining the SX208 set is simple and crucial for its longevity and performance:

Cleanliness: Keep the keys clean after each use.
Storage: Store the keys in the provided case to protect them from damage and loss. Proper storage also helps in organizing the set, making it easier to find the correct key when needed.

Environmental Protection:

The manufacturer encourages responsible disposal of unwanted materials. All tools, accessories, and packaging should be sorted and taken to a recycling center, ensuring disposal in an environmentally compatible manner rather than as waste.

Warranty and Support:

The product comes with a 12-month warranty from the purchase date, requiring proof of purchase for any claim. Parts support, including listings and diagrams, is available via the Sealey website, email, or telephone. The manufacturer also reserves the right to continually improve products and alter data, specifications, and component parts without prior notice, with no liability accepted for incorrect use of the product.