To Next PageTo Next PageWhat to do if my Sealey SL67S Remote Starter turns on but won’t jump start my vehicle?
First, check all connections to ensure they are secure. Next, verify that the charge level of the jump starter is at least 40%. It is recommended not to attempt to jump start your vehicle more than three consecutive times. If, after these steps, the vehicle still does not start, it's best to consult a qualified service technician.
Why is my Sealey SL67S Remote Starter’s display not turning on?
Ensure the unit is adequately charged by connecting it to a power source to reset it. Also, verify that the ON/OFF switch is set to the ON position.
What does it mean when the cable is connected only to the battery and the Sealey Remote Starter beeps once per second?
This indicates that the vehicle battery voltage is lower than 10.5V. You can connect to the jump starter and turn the key to jump start the vehicle.
What to do if my Sealey SL67S will not recharge?
Ensure that the power source you are using to recharge the jump starter is live and functioning correctly.
What does it mean when the cable is correctly connected to both battery and jump starter, the Green LED is blinking, the RED LED is off, and there is no beep on my Sealey SL67S Remote Starter?
This indicates that a 'fake' high battery voltage is detected, but reverse protection did not activate. You can turn the key to jump start the vehicle.
Why is the thermometer symbol flashing on my Sealey Remote Starter?
The flashing thermometer symbol indicates that the unit is either too hot or too cold. The symbol will disappear once the temperature condition is resolved.
General| Brand | Sealey |
|---|---|
| Model | SL67S |
| Category | Remote Starter |
| Language | English |
Covers essential safety rules for handling and operating the jump starter unit, including electric shock and fire risks.
Details risks associated with explosive gases and placement near flammable materials to prevent explosions.
Advises on precautions like avoiding sparks, removing metal items, and handling tools near batteries.
Step-by-step guide on how to use the jump starter to start a vehicle engine.
