Sealey VS862 - Page 8

3) When completed, press the N button to return.
Keyboard Test
The Keyboard Test is used to verify that the keys are functioning
properly.
1) Use the UP/DOWN scroll buttons to select Keyboard Test from
System Setup menu, and then press Y button.
Display Test
Press [Y] to test.
Look for missing
spots in characters.
Press <N> to return.
System Setup
1) Contras
t
2) Display Test
►3) Keyboard Test
4) Unit of Measure
2) Press any key to start test. When you press a key, the key name
should be observed on the display. If the name does not show up,
then the key is not functioning properly.
< V2.6 USB-V1.9 SERIAL SOFTWARE V
8
< V2.6 USB-V1.9 SERIAL SOFTWARE
8