Aircraft Maintenance Manual - Seamax M-22
SW / FW
Page 85
11 Painting and Coating
The Seamax M-22 uses polyurethane base paint and primer. Both are UV resistant and protect
fiberglass and fabric against UV rays.
Scratches or others defects on the paint over fiberglass parts, should be sanded up to the fiberglass.
If the fiberglass is also damaged, refer to structural repairs.
Parts covered with fabric including the wings, ailerons and flaps can be repaired with paint only if the
fabric is not damaged.
11.1 Tools Required
Spray gun
11.2 Materials Required
Sand paper 320, 400, 600 and 1200
Putting PPG 1800
Primer PPG D830 FL
Primer catalyze PPG DF 863
Paint PPG Delfleet PE1AERM060
Paint catalyze PPG F 361
Solvent PPG 372
Polishing paste
11.3 Type of Maintenance
Heavy.
11.4 Level of Certification
Tasks can be completed only by a responsible individual who holds an FAA Repairman Certificate
and has received a painting training course by SEAMAX AIRCRAFT LTDA.
11.5 Putting
To Next Page