Seametrics FT430 Quick Setup Guide

Set Total Display Units (T UNIT)
Page 2 of 2
LT-14244-063015
6/30/2015
R UNITSET K T UNIT SET D
SET P RESET EXIT
000
PRESS TO CHOOSE
NUMBER OF DECIMAL PLACES
IN TOTAL DISPLAY
R UNITSET K T UNIT SET D
SET P RESET EXIT
00000.0 GALLONS
PRESS TO SET NUMBER OF
GALLONS TOTALIZED PER
PULSE SENT OUT PULSE1
R UNITSET K T UNIT SET D
SET P RESET EXIT
PRESS TO EXIT MENU AND
RETURN TO FLOW DISPLAY
View or change the number of decimals displayed in the total volume display.
The factory setting will show Set P which allows one to view or change the volume of
ow totalized per pulse sent to pulse out 1. The units for Set P follow the units select-
ed for the rate display. Secondary menu selection will change the display to Set A. The
alarm can be set to trigger on either a high or low ow condition as determined by the
user.
Return to the home screen, enter a submenu, or accept a parameter change.
R UNITSET K T UNIT SET D
SET P RESET EXIT
TOTAL = GALLONS
PRESS TO SET UNITS
FOR DISPLAY
View or change the total volume display units.
Set Number of Decimal Places (SET D)
Set Pulses & Alarms (SET P)
Exit & Save Setup (EXIT)

Seametrics FT430 Specifications

General

Brand	Seametrics
Model	FT430
Category	Measuring Instruments
Language	English