Seametrics iMAG 4700 - Quick Start Guide Manual

iMAG 4700
Mechanical Quick Start Guide
253.872.0284 seametrics.com
ComponentsComponents
Power/Output Cable
(DC conguration)
OptionalOptional
Output Cable
(Battery
conguration)
Security Seal
Recommended ToolsRecommended Tools
Recommended:
• T-15 Torx head driver
• 0.098 inch (small) at head screw driver
• Crescent Wrench
Optional:
• Channel locks
Meter and
Indicator with
Hinged Cover
ANSI/NSF-61
Rated Gaskets
Gaskets
Failure to install
gaskets will void
warranty!