seapro Standard Model - Split-Time Chronograph Function

Chronograph Timer Functions
Split-time function:
1. Press pusher A to start.
2. Press pusher B to momentarily stop.
3. Read off the intermediate time.
4. Press pusher B to resume. The hands will catch up with the
event being timed.
5. Press pusher B again to read a second split-time. Repeat
steps 2-4 to take any additional split-times.
6. Press pusher A to stop the chronograph.
7. Take the final time reading.
8. Press pusher B to reset.
First Place and Runner Up Results
Most chronographs measure first place and runner up results.
1. Press pusher A to start the chronograph.
2. When the winner crosses the finish lie press pusher B.
3. When the second runner crosses the finish line press pusher A.
4. Note the time of the winner as shown on the dial.
5. Press pusher B and the hands will move to indicate the time for the runner up.
6. Press pusher B again to reset and return all hands to zero.
A
B
22