To Next PageTo Next Page
Need help?Do you have a question about the Sears 721.80402402 and is the answer not in the manual?
General| Model Number | 721.80402402 |
|---|---|
| Category | Microwave Oven |
| Power Output | 1000 Watts |
| Child Safety Lock | Yes |
| Warranty | 1 year limited |
Guidelines to prevent exposure to excessive microwave energy during servicing.
Warnings about potential microwave radiation exposure and handling.
Essential grounding procedures for safe appliance installation and operation.
Description and labeling of the microwave control panel buttons and display.
Schematic representation of the overall electrical system of the microwave.
First part of the detailed schematic diagram for the microwave.
Important safety and operational guidelines for using the microwave oven.
Steps for testing the microwave after installation or repair.
Overview of the microwave's key features and technical specifications.
Essential precautions and tips for performing service and repairs on the unit.
Critical cautions to observe before and during microwave leakage testing.
Procedure for measuring microwave radiation leakage from the oven.
Steps for measuring microwave leakage with the outer casing detached.
Steps for measuring microwave leakage on a complete, assembled oven.
Procedure for measuring the microwave oven's power output.
Step-by-step guide for removing the power and control circuit board assembly.
Detailed steps for safely disconnecting the FPC connector.
Detailed steps for safely reconnecting the FPC connector.
Steps for detaching the microwave door assembly.
Procedure for taking apart the microwave door components.
Steps for reattaching and adjusting the microwave door assembly.
Steps for adjusting door latches and interlock switches for safety.
Procedure to verify proper alignment of door latches and switches.
Verifying the correct sequence of interlock switch operations.
Testing the continuity of the primary interlock switch.
Testing the continuity of the secondary interlock switch.
Testing the continuity of the interlock monitor switch.
Procedures for testing various components like transformer and magnetron.
Troubleshooting common issues related to fuse blowing.
Troubleshooting display errors and input issues.
