BASIC OPERAT!
1. SELF DEMONSTRATION
Hold down the Code Key and press the "D" Key. The
typewriter wil! automatically perform a printout of featureS:_
When you activate this function, the correction memory
is cleared.
To :cancel the printout at any time, simply touch the
Space Bar.
2. HOW TO START TYPING
1. Set Up Typewriter
1) Place the typewriter on a desk or other fiat surface. Lift
up the Keyboard Cover and remove it.
Keyboard Cover
- . . _ Cord:Compa_tme_
over
Power Cord
2) Press:the- mark_on_:the::CorcL:Oompartment-:,Go_,e_--orf;tlqe:-.`
rear of the typewriter, open the cover and take out the
power cord.
3) Fit the power cord through the slot on the Cord Comparb
ment and close the cover. Plug the cord into an outlet of
the proper voltage (110-120V AC 60Hz).
To Next Page
Loading...