Seastar Solutions Hynautic 04 Series - Page 17

Installation Instructions & Owner's Manual
13
COM.
N.C. N.O.
ADAPTER 1/4" PIPE – 5/16" TUBE (530175)
TUBE NUT (690621)
5/16" FLEXIBLE HOSE WITH
45˚ FEMALE FLARE SWIVELS
NOTE: MUST USE A MIN. OF
12" OF FLEX HOSE
BLEEDER ASSEMBLY
(690010)
NIPPLE 1/4" PIPE (690551)
TO CONTROL STATIONS
COPPER TUBING 5/16" O.D.
ADAPTER-FILTER (691601)
5/16", 45˚ FLARE
UNION (691601)
ADAPTER 1/4" PIPE 5/16"
TUBE (530175)
BLEEDER ASSEMBLY (690010)
1/4" PIPE TEE (690551)
CONTROL ARM MAY
BE ROTATED TO ANY
POSITION ON SHAFT
SHAFT’S RANGE
OF ROTATION
IS 78˚
Figure 15. ST-06 Integrated Throttle Slave.
ADAPTER-
FILTER
(690080)
ADAPTER 1/4" PIPE
5/16" TUBE
(530175)
(950119)
NIPPLE
1/4" PIPE
(690551)
ST-04
ADAPTER
(690631)
ADAPTER 1/4"
PIPE 5/16" TUBE
(530175)
COPPER TUBING
5/16" O.D.
ADAPTER
(690631)
BLEEDER ASSEMBLY
(690010)
5/16" FLEXIBLE HOSE WITH
45˚ FEMALE FLARE SWIVELS
NOTE: MUST USE A MIN.
OF 12" OF FLEX HOSE
5/16", 45˚ FLARE
UNION (691601)
TUBE NUT
(690621)
TUBE NUT (690621)
78˚
COPPER TUBING
5/16" O.D.
NIPPLE 1/4"
PIPE
(690551)
S1 S2
V1 V2
Figure 16. ST-04 Throttle Slave with STV-10 Lock-Out Valve.
TUBING INSTALLATION
HYNAUTIC CONTROLS