Seastar Solutions Hynautic 04 Series - Page 18

14
Hynautic Hydraulic Engine Controls – 04 Series
BLEEDER ASSEMBLY
(690010)
1/4" PIPE TEE (690441)
ADAPTER-FILTER (690080)
COPPER
TUBING
5/16" O.D.
5/16" FLEXIBLE HOSE WITH
45˚ FEMALE FLARE SWIVELS
NOTE: MUST USE A MIN. OF
12" OF FLEX HOSE
5/16" 45˚
FLARE UNION
(691601)
TUBE NUT
(690621)
TUBE NUT (690621)
BLEEDER
ASSEMBLY
(690010)
NIPPLE 1/4" PIPE (690551)
5/16" FLEXIBLE HOSE WITH
45˚ FEMALE FLARE SWIVELS
NOTE: MUST USE A MIN. OF
12" OF FLEX HOSE
ADAPTER
1/4" PIPE
5/16" TUBE
(530175)
TO
CONTROL
STATIONS
COPPER TUBING
5/16" O.D.
CONTROL ARM MAY
BE ROTATED TO ANY
POSITION ON SHAFT
1/4" PIPE TEE
(690441)
NIPPLE 1/4"
PIPE (690551)
ADAPTER 1/4"
PIPE 5/16" TUBE
(530175)
5/16" 45˚
FLARE UNION
(691601)
TO CONTROL
STATIONS
ADAPTER-FILTER
(690080)
Figure 19. SS-04 Shifter Slave.
COPPER TUBING
5/16" O.D.
TUBE NUT
(690621)
TO
RESERVOIR
ADAPTER-
FILTER
(690080)
MOUNTING
HOLES
Figure 18. MCV-04 Charging Valve.
FILTER PLUG
ASSEMBLY
(380070)
COPPER TUBING
5/16" O.D.
DRAIN PLUG
(690010)
ADAPTER
(530175)
TUBE NUT
(690621)
Figure 17. Ports on Bottom of R-04 Reservoir.
TUBING INSTALLATION
HYNAUTIC CONTROLS