Need help?Do you have a question about the Seastar Solutions Seastar Manual Jackplate and is the answer not in the manual?
General| Brand | Seastar Solutions |
|---|---|
| Model | Seastar Manual Jackplate |
| Category | Boating Equipment |
| Language | English |
Read and understand the manual, ensure all components are present, and comply with system ratings before installing the jackplate.
Install as directed, do not substitute parts, and confirm no interference between components using clearance checks.
Inspect jackplate for damage and binding, check for loose bolts, and confirm no interference before operating the boat.
Always wear a PFD and use the engine shut-off cord. Maintain proper water pressure to avoid outboard damage.
Rinse the jackplate thoroughly with fresh, clean water only. Avoid using cleaning fluids with ammonia or acids.
Work must be done by a qualified mechanic. Check bolt torque, and inspect for damage, wear, and binding every 100 hours or 6 months.
Lists required tools, equipment, and other connection hardware for mounting the jackplate to the transom and outboard.
Procedure for mounting the jackplate to the transom, including inserting bolts and sealing holes with marine sealant.
Steps for lifting the outboard, selecting mounting holes, and securing it to the jackplate using specified hardware and torque.
Instructions for adjusting the jackplate position up or down, including loosening bolts, turning the adjustment screw, and torquing.
Verify full steering travel and check for interference between jackplate and other components during full tilt.
Details the warranty coverage for SeaStar Solutions products, including duration and conditions for replacement.
Explains how to obtain a Return Goods Authorization number and the required labeling for returning products.
Provides contact information including phone, email, and operating hours for technical assistance with SeaStar products.
To Next Page
