Seat ateca - Page 166

Operation
Removing
●
Detach the cord loops ›
›
›
Fig. 159
B
from
their hook
s
A
.
●
Remove the rear shelf from the side sup-
por
ts
›
›› Fig. 160 by pulling it upwards and
then take it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
››› page 164.
Fitting
●
Insert the cover horizontally so that the “re-
cess” fits onto the axis of the supports
››› Fig. 160 and press down until it engages.
●
Hook the loops ››› Fig. 159
B
to the rear
lid.
WARNING
●
The luggag
e compartment cover must al-
ways be fixed properly (risk of accident).
●
The luggage compartment cover should not
be used as a storage shelf. Articles placed on
this cover could cause injury to vehicle occu-
pants in an accident or if the brakes are ap-
plied suddenly.
Storing the rear shelf
Fig. 161 In the luggage compartment: covers
f
or s
t
oring the rear shelf.
Fig. 162 In the luggage compartment: fitting
the s
t
or
age compartment shelf.
The rear shelf can be stored under the lug-
g
ag
e c
ompartment variable floor.
●
Remove the left and right covers
››› Fig. 161.
●
Press the rear shelf until it engages in its
housing ››› Fig. 162.
●
Put the left and right covers in their original
position.
Tailboard for transporting long items*
Fig. 163 On the rear seat backrest: opening
the t
ai
l
board.
Fig. 164 In the luggage compartment: open-
in
g the t
ai
lboard.
164