EasyManua.ls Logo

Seat ateca - Page 284

Seat ateca
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
WARNING
The enhanced security provided by the elec-
tric st
ability control of the towing vehicle and
trailer should not lead you to take any risks
that could compromise your safety.
Adapt your speed and driving style at all
times to suit visibility, weather, road and traf-
fic conditions.
Accelerate with caution when the road is
slippery.
When adjusting any settings, stop acceler-
ating.
WARNING
The electric stability control for the towing
vehicl
e and trailer may not correctly detect all
driving conditions.
When the ESC is switched off, the stabilisa-
tion of the towing vehicle and trailer is also
switched off.
The stability system does not always detect
light and unstable trailers, so it may not sta-
bilise these correctly.
When driving on slippery surfaces with
poor grip, the trailer can even interfere with
the stability system.
Trailers with a high centre of gravity can tip
even without having previously swayed.
If a trailer is not attached, but the trailer
power socket is connected (e.g. installation
of a bicycle rack with lights), repeated auto-
matic braking may occur in extreme driving
conditions.
Retrofitting a towing bracket
Fig. 237 Limits and attachment points for ret-
r
ofittin
g a t
owing bracket.
SEAT recommends that towing brackets be
r
etr
ofitt
ed at a specialised workshop. For ex-
ample, it may very well be necessary to ad-
just the cooling system or mount thermal pro-
tection plates. SEAT recommends visiting a
SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in
mind. The distance between the centre of the
spherical head and the road Fig. 237
D
must never be less than that indicated. This
al
so ap
p
lies when the vehicle is fully loaded,
including the technically permissible maxi-
mum vertical load on the coupling device.
Distance specifications Fig. 237:
Attachment points
932.5 mm
65 mm min.
350-420 mm
220 mm
615.5 mm
1,043 mm
WARNING
If the cables are improperly or incorrectly
connected, thi
s may lead to malfunctions in
the entire vehicle electronic system, as well
as to accidents and serious injuries.
Never connect the trailer's electric system
to the electrical connections of the tail lights
A
B
C
D
E
F
G
282

Other manuals for Seat ateca

Related product manuals