69Cockpit
2. Access the Configuration menu with the steering wheel controls
– To access the “Configuration” menu, press button
C
⇒ fig. 44
until the menu is displayed. Now you are in this menu.
3. Open the main menu “Winter tyres”
– Select option Winter tyres using switch
B
.
– Press button
A
. The menu Winter tyres is opened.
4. Program a speed limit warning
– Use button
B
to select the menu option + 10 km/h or - 10 km/
h and press button
B
to either increase or decrease the set
speed.
5. To activate and deactivate the speed limit warning
– Use switch
B
to select the menu point On / Off and press the
button to switch the speed warning on or off. If the speed warn-
ing is deactivated, three dashes will be displayed ---
6. To close the menu “Winter tyres”
– In the menu select Back.
The function “Winter tyres” sends an optical and an acoustic signal when
the vehicle reaches the set speed.
Example menu “Winter tyres”
In the menu
Winter tyres
Function
Name of menu displayed
X km/h The current set speed is displayed
or --- or dashes will be shown if the function is deac-
tivated.
On / Off If the function is activated or deactivated
+10 km/h The set value increases by 10 km/h
-10 km/h The set value decreases by 10 km/h
Back The menu “Winter tyres” is closed and the last
displayed menu is shown.
Note
For electronic and vehicle equipment one or more of these menus will be
displayed.
Safety First Operating Instructions Practical Tips Technical Specifications
To Next Page
Loading...
