Seat Leon 5D - Page 124

Operation
In the vehicle settings menu of the infotain-
ment system you can adjust the duration of
the light switch-off delay, and activate and
deactivate the function.
Activating the “Coming Home” function
For vehicles with light and rain sensors.
●
Turn off the vehicle and turn off the ignition
with the lights in

›››
page 117 mode.
●
The automatic “Coming Home” function is
only active when the light sensor detects
darkness.
For vehicles without light and rain sensors.
●
Switch the ignition off.
●
Activate the headlight flashers for approxi-
mately 1 second.
When the driver door is opened, the “Coming
Home” lighting comes on. The headlight turn-
ing off time counts from when the last door or
rear lid are closed.
The “Coming Home” lighting turns off in
the following cases:
●
Automatically, once the headlight turning
off time has elapsed.
●
Automatically, when a vehicle door or the
rear lid is still open 30 seconds after starting
the engine.
●
If the light panel lamps are off
›››
page 117.
●
With the ignition is switched on.
Activating the “Leaving Home” function
●
Unlock the vehicle using the remote control.
●
The “Leaving Home” function is only activa-
ted when the lights are in

mode and the
light sensor detects darkness.
The “Leaving Home” lighting switches off
in the following cases:
●
Automatically, when the “Leaving Home”
switch-on time ends (default 30 sec).
●
When the vehicle is locked using the remote
control.
●
If the light panel lamps are off
›››
page 117.
●
With the ignition is switched on.
Note
To activate the “Coming Home” and “Leav-
ing Home” functions, the  lamp on the
main switch of the lights should be on and
the light sensor should detect darkness.
Hazard warning lights 
Fig. 103
Dash panel: hazard warning lights
switch
The hazard warning lights are used to draw
the attention of other road users to your vehi-
cle in emergencies.
If your vehicle breaks down:
1.
Park your vehicle at a safe distance from
moving traffic.
2. Press the button to switch on the hazard
warning lights
›››
.
3. Switch the ignition off.
4.
Apply the electronic parking brake.
5.
For a manual gearbox, engage 1st gear;
for an automatic gearbox, move the gear
lever to P.
6.
Use the warning triangle to draw the at-
tention of other road users to your vehicle.
122