Data transfer
●
Pr
ess the WPS butt
on on the WLAN r
outer
until the warning light on the router starts
flashing. If the WLAN router does not support
WPS the network must be configured man-
ually.
●
OR: Press and hold the WLAN button on the
WLAN router until the WLAN light on the router
starts flashing.
●
Press the WPS button on the WLAN device.
The wireless (WLAN) connection is establish-
ed.
Repeat this process to connect other devices.
Configure Internet access
The Infotainment System can use the WLAN
hotspot of an e
xt
ernal de
vice to establish an
internet connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and check the wireless hotspot on
the external device. If necessary, refer to the
manufacturer’s instruction manual.
●
Press the HOME > button; OR access the
Media mode and press the Settings menu.
●
Press on the menu WLAN > Enable WLAN
connection and check the verification box.
●
Press the Find function button and select
the device you want from the list.
●
If necessary, enter the network key of the
device in the Infotainment System and con-
firm with OK.
Manual settings:
●
To manually enter the network settings of
an external (WLAN) device.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the device.
Note
Due to the large number of devices on the
market, it is not possible t
o guarantee fault-
free operation of all functions.
175
To Next Page
