Seat Leon - Infotainment System; Infotainment operation

Infotainment System
function button to close all the open ap-
plications.
Pr
ess t
o displ
ay the mobile phone device
screen on the infotainment system
screen.
To open the MirrorLink® settings.
Press to return to the MirrorLink® main
menu.
Note
You will find information about technical re-
quirements, compatible mobil
e phone de-
vices, certified applications and their avail-
ability on the SEAT (www.seat.com) and
MirrorLink® websites, or at SEAT dealer-
ships.
WLAN access point*
Intr
oduction
3 Not availabl
e for model: Media System
The Infotainment System can be used to
share a WLAN connection with up to 8 devi-
ces
›››
page 174, Configuration for sharing
a connection over WLAN.
The Infotainment System can also use the
WLAN hotspot of an external device to pro-
vide Internet to the devices connected to the
hotspot (WLAN client)
›››
page 175.



Note
●
Data transmission may incur char
ges.
Due to the high volume of data exchanged,
SEAT recommends the use of a flat rate tar-
iff for data transmission. Mobile phone op-
erators can provide the relevant informa-
tion.
●
The exchange of data packages may
generate additional costs, depending on
your mobile phone rate, particularly if you
are abroad (for example, roaming rates).
Configuration for sharing a con-
nection o
v
er WLAN
Establishing the connection with the wire-
l
ess netw
ork (WLAN)
●
Pul
se the HOME >  button.
●
Activate the wireless network. To do so,
press the WLAN function button.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction man-
ual.
●
Activate the mobile device assignment on
the Infotainment System. To do so, press the
Enable WLAN connection button and acti-
vate the checkbox.
●
Enter and confirm the network key dis-
played on the device.
The following settings can also be made on
the menu Share connection:
●
Security level: WPA2 encryption automati-
cally generates a network key.
●
Network key: Network key automatically
generated. Press the function button to man-
ually change the network key. The network
key must have a minimum of 8 characters
and a maximum of 63.
●
SSID: WLAN Network name (maximum of 32
characters).
●
Do not send network name (SSID): Acti-
vate the checkbox to deactivate the visibility
of the wireless (WLAN) network.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
Wi-Fi Protected Setup (WPS)
3 This depends on the equipment and the coun-
try in question.
Wi-Fi Protect
ed Setup can be used to create
a ciphered local wireless network quickly and
simply.
●
Establish the connection with the wireless
network (WLAN).
17
4