Help with parking and manoeuvring
Trailer mode
The P
ark Assist syst
em cannot be s
witched
on if the factory-fitted towing bracket
›››
page 275 is electrically connected to a
trailer.
After changing a wheel
If, after changing a wheel, the vehicle stops
entering and exiting parking spaces correct-
ly, the circumference of the new wheel may
be different and the system may need to
adapt to it. The adaptation is automatic and
takes place during driving. Making turns slow-
ly and in both directions (20 km/h [12 mph])
for a few minutes may contribute to this
adaptation process
›››
in Introduction on
page 261.
Selecting a parking type
Fig. 184
On the instrument panel display: view
of the parking assist syst
em with r
educed vie
w.
Fig. 185
On the instrument panel display: indi-
cation of parking modes.
Park assist has the following 3 parking types:
R
e
v
erse parallel parking.
Reverse angle parking.
Forward angle parking.
Selecting a parking type after passing in
front of the space
After activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
type. The Park Assist system selects the park-
ing type automatically. The selected type is
shown on the instrument panel display
›››
Fig. 184 and on the Infotainment System
screen.
●
The necessary conditions to park with Park
Assist have to be met
›››
page 262.
●
Press button in the infotainment system,
> Driver assistance > Park Assist sys-
tem.
●
When the system is connected, the symbol
on the Infotainment System screen is high-
lighted. Additionally, the selected parking
type is shown on the instrument panel dis-
play. You can change the type of parking on
the Infotainment System screen.
●
If there are more spaces available, another
space can be selected by clicking on them
on the Infotainment System screen.
●
Follow the instructions displayed on the in-
strument panel while paying attention to traf-
fic and drive the vehicle past the parking
space.
Special case of perpendicular parking
space to park forwards without driving
past first
●
The necessary conditions to park with Park
Assist have to be met
›››
page 262.
●
Move forward towards the parking space
while paying attention to traffic and stop the
vehicle with the front part partially inside the
parking space.
●
Press button once in the infotainment
system, > Driver assistance > Park Assist
system.
»
263