EasyManua.ls Logo

Seat Leon - Towing bracket device*; Introduction

Seat Leon
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Help with parking and manoeuvring
Reverse assist modes
Depending on the equipment, the f
oll
o
wing
modes are available:
Angle parking: reverse parking perpendic-
ular to the road.
Assistance function for hitching a trailer:
helps to hitch a trailer.
Cross traffic: traffic is monitored in a trans-
verse direction.
Connecting and disconnecting
Connect the reverse assist
Select reverse gear.
OR: in the inf
ot
ainment syst
em select >
Driver assistance > Parking aid.
Disconnect the reverse assist
Drive forward at least 15 km/h (9 mph).
Shown on the display
The system’s functions and representations
may v
ary depending on the equipment.
The assist
ant's image vie
w changes when the
factory-fitted tow hitch is electronically con-
nected to a trailer
››
page 282.
Reverse assist functions and symbols
When the reverse assist is connected, you
can make adjustments using the function but-
tons. Some adjustments are equipment-de-
pendent.
Exit the current display
Switch to angle parking
››
page 274
Switch to the trailer hitching assistance
function
Switch to cross traffic
Adjust the display: brightness, contrast
and colour.
Switch to park assist
››
page 267
Display/hide the parking aid view
Guide lines
Green horizontal lines: extension of the vehi-
cle.
Yellow lines: vehicle path depending on the
steering angle.
Assistance function for hitching a trailer
On vehicles with a factory-fitted towing de-
vice, this function can be used to move the
vehicle close to a tow bar.
Auxiliary lines are shown in the infotainment
system.
|
Green lines: distance to the tow hitch. The
distance between the lines is approx. 0.25 m
Orange line: precalculated direction of the
tow hitch depending on steering wheel rota-
tion.
Cross traffic
This visualization helps to monitor traffic be-
hind the vehicle and can be used, for exam-
ple, when exiting garages or narrow exits.
Requirements
To park with reverse assist, the following re-
quir
ements must be met:
Do not e
x
ceed a speed of approx. 15 km/h
(9 mph).
Parking space width: vehicle width + 0.15
m (excluding mirrors).
To display a real image, the following require-
ments must be met:
The luggage compartment rear door is
closed.
The surroundings are on a flat surface.
The vehicle should not be loaded very
heavily at the rear.
273

Table of Contents

Related product manuals