Transporting children safely
Vehicle i-Size positions
Front passenger seat
Rear side seat Rear central seat
airbag enabled airbag disabled
X i-U i-U X
i-U: Position suitable for forward- or rear-facing i-Size child restraint systems with universal certification.
X
: Position not suit
able for i-Size child restraint systems.
Securing the child seat with the “ISOFIX/i-
Size” system
Y
ou are obliged to follow the seat manufac-
turer's instructions.
●
Open the cut-out section behind the
marked grooves to access the retaining rings
›››
Fig. 27.
●
Press the child seat onto the “ISOFIX” re-
taining rings until it is heard to engage se-
curely. If the child seat is equipped with Top
Tether anchor points, secure it to the corre-
spondent ring
›››
page 35. Observe the
manufacturer's instructions.
●
Pull on both sides of the child seat to ensure
that it is properly anchored.
Child seats with the “ISOFIX/i-Size” and Top
Tether attachment system are available from
Technical Services.
WARNING
The securing rings are designed only for
use with “ISOFIX” and Top Tether system
child seats.
●
Never secure other child seats that do
not have the “ISOFIX” or Top Tether system,
or safety belts or any other objects to the
securing rings – as this can result in poten-
tially fatal injuries to the child.
●
Ensure that the child seat is correctly se-
cured to the “ISOFIX” and Top Tether secur-
ing rings.
Top Tether securing belts
Fig. 29
Rear seats: adjustment and assembly
according to the T
op Tether belt.
»
35
To Next Page
Loading...
