Seat Leon - Page 72

Operation
cause damage to the vehicle or a fault.
Check the f
ault
y function as soon as possibl
e.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
Accessing warnings and information
●
Using the Infotainment system, press  > 
Vehicle info > Vehicle status > Warnings.
●
Or:
1)
Access the Vehicle menu, then press
the  button on the multifunction steering
wheel or the  button on the wind-
screen wiper lever and select Warning mes-
sage memories.
Driver alert system (break recom-
mendation)*
Fig. 56
On the instrument panel display: driver
al
ert syst
em symbol
.
Function and operation
F
atigue det
ection det
ermines the driving be-
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
instrument panel display
›››
Fig. 56. The mes-
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the 
button on the windscreen wiper lever or the
button  on the multi function steering wheel
›››
page 78.
The message can be recalled to the instru-
ment panel display using the multifunction
display
›››
page 68.
Conditions of operation
Driving behaviour is only calculated on
speeds above about 65 km/h (40 mph) up to
around 200 km/h (125 mph).
Switching on and off
Fatigue detection can be activated or deacti-
vated in the infotainment system using the
function button  > Driver assistance > Fa-
tigue detector
›››
page 87. A mark indi-
cates that the adjustment has been activa-
ted.
System limitations
The Fatigue detection has certain limitations
inherent to the system. The following condi-
tions can limit the Fatigue detection or pre-
vent it from functioning.
●
At speeds below 65 km/h (40 mph)
●
At speeds above 200 km/h (125 mph)
1)
Vehicles with analogue instrument panel.
70