EasyManua.ls Logo

Seat Leon - Page 91

Seat Leon
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Opening and closing
Opening and closing
Set of v
ehicl
e k
eys
Vehicle key
Fig. 71
Vehicle key
Fig. 72
Vehicle key: remove the key blade.
Key to
Fig. 71
Unlock the vehicle
1
Lock the vehicle
Unl
ock only the r
ear lid. Pr
ess the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Button to remove the key blade.
With the vehicle key the vehicle may be
locked or unlocked remotely
››
page 91.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised
››
page 91 or the battery
changed
››
page 90.
Different keys belonging to the vehicle may
be used.
Remove the key blade from the remote
control
The central locking remote control has the
key blade inside it for use in case of emergen-
cy locking/unlocking of the driver's door
››
page 100.
If you press button
››
Fig. 71
4
once the key
bl
ade is unl
ock
ed and a ring appears as a
2
3
4
key ring. Press and hold the button and at the
same time pull on the ring in the dir
ection of
arr
o
w
››
Fig. 72
2
to completely remove the
k
ey bl
ade
.
Control lamp on the vehicle key
When a button on the vehicle key is pressed,
the control lamp flashes
››
Fig. 71 (arrow)
once briefly, but if the button is held down for
a longer period the control lamp flashes sev-
eral times, such as in convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery
››
page 90.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle ID number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also
true for keys which are specially cut for the
vehicle.
The vehicle keys or new spare keys can be
obtained from a SEAT Official Service, a spe-
cialised workshop or an approved key service
qualified to create this kind of key.
New keys or spare keys must be synchronised
before use
››
page 91.
»
89

Table of Contents

Related product manuals