Need help?Do you have a question about the Seaward PrimeTest 300 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Insulation Test Voltage | 250 V, 500 V, 1000 V |
| Measurement Types | Earth Bond, Insulation Resistance |
| Battery Type | Rechargeable |
| Operating Temperature | 0°C to 40°C |
| Power Supply | Battery / Mains |
Instructions for charging the unit's rechargeable batteries before first use.
Steps to power on the PrimeTest 300 unit and initial user settings.
How to navigate the PrimeTest 300's menu system using keys and options.
Instructions for transferring test records and configuration data from the PrimeTest 300 to a PC.
Instructions on how to search through saved test data using various criteria on the PrimeTest 300.
Overview of the configuration menu for test sequences, time, date, and Bluetooth settings.
Configuration for test options like Asset ID, failure handling, and comments.
Procedure for performing Earth Continuity tests on Class I equipment.
Verifying adequate insulation of mains supply pins from earth for Class I and II equipment.
Measuring current flowing in the earth conductor of Class I equipment.
Measuring current that would flow if a person touched the appliance, based on a body model.
Checking the resistance of the Live to Earth circuit of the mains electrical installation.
Measuring the time it takes for an RCD to trip when a test current is applied.
Testing IEC leads through continuity, insulation, and polarity checks.
How to enter or scan an Asset ID before starting an automatic test sequence.
Initiating and running a selected automatic test sequence after entering asset details.
To Next Page
