Seaward PrimeTest 50 - User Manual

PrimeTest 50 Operating Instructions
1
Operating Instructions
Bracken Hill
South West Industrial Estate
Peterlee
Co Durham
SR8 2SW
ENGLAND
Tel: +44(0)191 5863511
www.seaward.co.uk
sales@seaward.co.uk
service@seaward.co.uk
Part Number 347A550 Revision 1
© 2006 Seaward Electronic Ltd

Summary

Limited Warranty & Limitation of Liability

Declaration of Conformity

Important Information

Introduction

Performing Tests

Checking a mains power outlet

Procedure for verifying the wiring and status of a mains power outlet.

Testing a Class I Appliance

Steps to perform electrical safety tests on Class I appliances.

Testing a Class II Appliance

Procedure for conducting electrical safety tests on Class II appliances.

Testing a mains cord

Instructions for testing the continuity and insulation of mains cords.

Specification

Maintenance

Battery Check

Battery Replacement

Step-by-step guide for safely replacing the batteries in the unit.

Service and Calibration

Seaward PrimeTest 50 Specifications

General

Continuity Test Current	200 mA
Battery Type	6 x AA batteries
Display	LCD
Appliance Classes	Class I, Class II
Earth Bond Test Current	200 mA
Power Source	Battery
Resistance Range	0.01 Ω to 20 Ω