To Next PageTo Next Page
Need help?Do you have a question about the Seaward PAC3760 DL and is the answer not in the manual?
General| Brand | Seaward |
|---|---|
| Model | PAC3760 DL |
| Category | Test Equipment |
| Language | English |
Explains symbols used for warnings and precautions in the manual.
Provides essential safety instructions for using the PAC3760 DL safely.
Details safe operating environments and handling of the device and its accessories.
Lists the included and available accessories for the PAC3760 DL.
Diagrams illustrating the front and end panels of the PAC3760 DL unit.
Details the functions of buttons, ports, and the LCD display on the device.
Describes how the LCD display shows test progress, results, and RPE icon meaning.
Explains Riso and ILEAK icons and how to power on/off and initiate tests.
Instructions on how to switch on the PAC3760 DL unit using specific buttons.
Procedure for testing earth continuity on Class I appliances.
Steps for performing an insulation test on Class I appliances.
Procedure for performing earth continuity and leakage tests on Class I appliances.
Interpreting mains supply status and leakage test results (FAIL/PASS).
Procedure for testing earth continuity and insulation on Class II appliances.
Interpreting insulation test results for Class II appliances.
Procedure for performing earth continuity, insulation, and leakage tests on Class II appliances.
Interpreting mains supply status and leakage test results for Class II appliances.
Procedure for testing mains cords, including earth continuity, insulation, and wiring.
Procedure for testing extension leads using the PAC3760 DL.
Procedure for testing powerboards (EPODs) with specific test sequences.
Details two procedures (A and B) for testing EPOD sockets.
Procedure for testing EPODs/extension leads with surge protectors or RCDs.
Details procedures for testing EPODs/extension leads with MOV/RCDs.
Instructions for performing electrical tests on 3-phase equipment using an adaptor.
Procedure for measuring the operating time of installation RCDs.
Details mains supply status checks and pass criteria for RCD operating time tests.
Procedure for measuring the operating time of portable RCDs.
Details mains supply status checks and pass criteria for portable RCD operating time tests.
Instructions on how to save test results to the PAC3760 DL's memory.
How to set and change the retest period for appliances.
Procedure for recalling and scrolling through saved test results.
Instructions on how to clear all stored test results from memory.
Guide on using the Datalogger program to transfer test data to a computer.
Instructions for printing test results and test labels using a compatible printer.
Procedure for setting the date and time on the PAC3760 DL.
Addresses common messages and problems encountered with the PAC3760 DL.
Details the display range, measuring range, and accuracy for Earth Continuity and Insulation tests.
Lists specifications for leakage, 3-phase, cord, and RCD tests.
Table showing default pass/fail limits for various tests.
Information on IP rating, operating/storage temperatures, and overvoltage category.
Instructions for cleaning and general maintenance of the PAC3760 DL.
How to check battery status and replace batteries when low or depleted.
Step-by-step guide for replacing the batteries in the PAC3760 DL.
Instructions for replacing the fuse, including fuse type and safety precautions.
Guidance on recalibrating the instrument for accuracy.
Contact details for Emona Instruments in Australia for service and sales.
Contact details for Electrotest Ltd in New Zealand for service.
Explanation of 'Lo Load' and 'Hi Load' messages and their solutions.
List of error codes, their meanings, and recommended actions.
Summary of test settings, descriptions, and parameters for various tests.
Detailed requirements and examples for different test types.
