Need help?Do you have a question about the Seaward PrimeTest 125 EL and is the answer not in the manual?
Details the device's purpose and the types of appliances it can test.
Explains the LCD display, icons, and how tests are initiated via push buttons.
Procedure for testing appliances with a protective earth conductor.
Method for performing leakage tests on Class I appliances.
Procedure for testing appliances with double insulation.
Method for performing leakage tests on Class II appliances.
Instructions for testing the continuity and insulation of mains cords.
Steps for testing extension leads using the PrimeTest 125 EL.
Guidance on testing powerboards and their outlets.
Procedure for testing devices with surge protectors or RCDs.
Step-by-step guide for replacing the unit's batteries.
Procedure for replacing the internal fuse of the PrimeTest 125 EL.
General| Continuity Test Current | 200 mA |
|---|---|
| Leakage Test | Yes |
| Run Leakage Test | Yes |
| Substitute Leakage Test | Yes |
| RCD Test | Yes |
| Power Socket Test | Yes |
| Display | LCD |
| Pass/Fail Indication | Yes |
| Data Logging | Yes |
| Connectivity | USB |
| Battery Powered | Yes |
| Power Supply | Rechargeable battery |
| Test Voltage | 250V, 500V, 1000V |
| Current Range | 25 A |
| Dimensions | 100mm x 220mm x 100mm |
| Resistance Range | 0.01Ω to 1000MΩ |
To Next Page