3.2 Display
The LC-Display has 256 x 128 pixels, controls for setting contrast, and
switchable back lighting. This enables graphic information to be readable
even in difficult lighting conditions.
The activated function is display in representation.
Fig 2 Display
1 Window on display (range/X zoom)
2 Back light
3 Contrast
4 ,M for A loading; -M for D loading
5 Average counter in mode averaging
There are two modes of displaying the reflectograms: Press ”Display” when
you want to work with two images of the trace, see
Fig 3. The upper is the
reflectogram of the full range of measurement. There is a black bar below
this overview indicating a section the position of which can be moved by
means of the cursor. The lower and larger part of the display shows this
black section magnified in full detail.
reflectogram
To Next Page
Loading...
