3.8.9 Self Test
After turn on, the
Easyflex Com
performs an automatic selftest. If error code
1 is display the Lithium accumulator is (almost) discharged (the device will
still operate for a short while, but you should submit it to the Customer
Service to have the Lithium accumulator replaced).
Error code 2 asks for setting the clock (2nd Menu, Menu/System Mark, go
with rotary encoder to Date&Time Mark, select unit of time with rotary
encoder Mark, select unit of time with rotary encoder Mark for return). If
both errors occur at the same time, error code 3 is display.
Key combination (2nd Menu, Menu/System Mark, Self test Mark) starts a
comprehensive self test. Please contact our Customer Service should any
error code be display.
To Next Page
Loading...
