sebaKMT Easyflex Com - Operation; Safety Precautions; Modes of Operation

MAN_Easyflex_com_eng_01.doc 47
4.2 Operation
4.2.1 Safety Precautions
Protect the device from moisture.
Do not cover the ventilation slots of the plug-in mains unit.
Do not insert any items into the ventilation slots.
Never expose to direct heat or direct sunlight.
Do not open the device as there are no user-maintained components
inside and any warranty might be invalidated.
Do not store or use charger and mains unit in the close vicinity of storage
media.
Only use the plug-in mains unit supplied.
4.2.2 Modes of Operation
OPERATION
The green LED is alight.
Indicates that the charger is ready for use.
STATUS / Waiting mode
The amber LED is flashing regularly.
1.) No accumulator has been inserted:
The device is waiting for a accumulator to be inserted for charging.
2.) A accumulator has been inserted:
The accumulator is fully charged and waiting for being removed.
STATUS / Charging
The amber LED is permanently alight.
A accumulator has been inserted. It is being charged.
Please pay also attention to section 4.3, to extend the service life
of the NiMH accumulator.