The accumulator can also be charged from the on-board network of a
vehicle. To do this, use the vehicle adapter cable to connect the charger
case to the 12 V DC on-board network.
Motorcar adapter cable
Charger case
12 V supply
DC-IN 12 V
Fig 13 Connection to a Vehicle supply
Fig 14 How to Insert the NiMH accumulator into the Charger Case
4.1.3 General Instructions on How to Handle a NiMH Accumulator
ATTENTION
Do not short-circuit a accumulator.
Do not dismanntle or modify a accumulator. Do not
dispose of in fire.
Protect batteries from moisture.
Do not expose batteries to strong impacts.
Make sure that a damaged accumulator is disposed of
immediately and properly.
NOTE
A NiMH accumulator may heat up when being charged
or discharged. This is normal and does not indicate a
defect.
Dispose of batteries which cannot be used any longer
properly or submit it for RECYCLING.
Light-emitting diodes
To Next Page
Loading...
