Sebo Automatic X4 User Manual (English)

Other manuals for Sebo Automatic X4

Questions and Answers:

A
Anthony RiveraJul 25, 2025
Why does my Sebo Automatic X4 turn off and on?
- A
  Andrea AllenJul 25, 2025
  Your Sebo Vacuum Cleaner might be shutting off intermittently due to several reasons. It could be a faulty connection because the handle isn't fully inserted into the bag housing. Try releasing the handle catch, pushing the handle down, and closing the handle catch. Another cause may be that it's not plugged into a working outlet, so try a different outlet. A worn cable could also be the culprit, in which case you should replace it. Lastly, ensure the bag housing is correctly locked on top of the power head, with the housing release button snapped outward to its locked position.
W
Wanda KempJul 30, 2025
What to do if my Sebo Automatic X4 bag full light is on?
- A
  Austin MartinezJul 30, 2025
  If the bag full or clog light is on or flashing and your Sebo Vacuum Cleaner shuts off, it could be due to a few reasons. The most common is a full bag, so replace the bag. It could also be a clog in the airflow pathway, attachment hose, cleaning wand, swivel neck, or entrance to the filter bag. Finally, a dirty microfilter could be the cause, so replace the microfilter.
K
Kevin JohnsonAug 3, 2025
What to do if the brush light is flashing and my Sebo Automatic X4 Vacuum Cleaner shuts off?
- K
  karenboydAug 3, 2025
  If the brush light is flashing and your Sebo Vacuum Cleaner shuts off, the brush is likely jammed. Turn off the power switch, unplug the machine, and remove any obstruction from the brush roller.
M
Mr. Kenneth GonzalezAug 7, 2025
Why is the brush light on my Sebo Automatic X4 Vacuum Cleaner?
- T
  Tami BrownAug 7, 2025
  The brush light on your Sebo Vacuum Cleaner indicates that the brush is worn and needs to be replaced.
A
Amanda BonillaAug 11, 2025
Why won’t the front bag door fully close on my Sebo Automatic X4?
- A
  April AndersonAug 11, 2025
  If the front bag door on your Sebo Vacuum Cleaner won’t fully close, it might be because the cover release flap isn't fully closed. Try reinserting the bag and locking the cover release flap down firmly. Another reason could be that the bag isn't inserted properly; reinsert it with the cover release flap up until it's firmly latched in the bag holder. Lastly, the microfilter might not be properly inserted. Lift the safety lever and insert the filter with the vertical plastic ridge facing you.
R
Ryan MarshAug 15, 2025
Why is the brush light slowly flashing on my Sebo Automatic X4 Vacuum Cleaner?
- J
  John MahoneyAug 15, 2025
  The brush light slowly flashing on your Sebo Vacuum Cleaner indicates that the vacuum is stationary and in the upright locked position.
C
chaynesAug 20, 2025
Why doesn’t the hose retract after cleaning wand is inserted in my Sebo Automatic X4?
- B
  Bonnie MaysAug 20, 2025
  If the hose doesn’t retract after the cleaning wand is inserted in your Sebo Vacuum Cleaner, it's likely that the cleaning wand isn't properly inserted. Reinsert it, making sure the top of the handle is pointing back and the tube is fully seated on the protruding tab on top of the bag housing.

Sebo Automatic X4 Specifications

General

Suction power	- AW
Maximum input power	1100 W
Annual energy consumption	46.4 kWh
Cord length	12 m
Power control	Electronic
Noise level	81 dB
Cleaning type	Dry
Cleaning surfaces	Carpet
Vacuum air filtering	Micro
Dirt separating method	Filtering
Product type	Upright vacuum
Dust capacity	5.3 L
Product color	Blue, Yellow
Tube material	The material the tube is made of.
Dust container type	Dust bag
Manual	Yes