Sebury F2 - Page 4

5. Installation
After connecting cable, mounting the device on wall
1). Pull the back plate shown below to open
2). With four screws to secure the appliance to the hole in the 4.
3). Connect the device to controller and computer according to the above definition.
Note᧶
᧶
For device safety, please do setting the communication password before using.
6. Wiring
Controller interface
᧤
4 cables
᧥
RS485 interface
᧤
2 cables
᧥
Cable color
Definition
Cable color
Definition
Red
Power supply :(9V
ᨺ15V
DC᧥
White
RS485A
Black
GND
Blue
RS485B
Brown
DATA0
Yellow
DATA1