EasyManua.ls Logo

SEC Sentry 822 PS - Important Safety Instructions

SEC Sentry 822 PS
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS – THIS MANUAL
CONTAINS IMPORTANT INSTRUCTIONS
FAILURE TO FOLLOW SAFETY INSTRUCTIONS AND
WARNINGS COULD RESULT IN INJURY OR DEATH
Read all the instructions
before installing or
operating the Pump Sentry.
ALWAYS disconnect
batteries and AC power
source from the Pump
Sentry before storing,
handling, or making any
adjustments to the unit.
Use Pump Sentry only as
described in this manual.
Any other use not
recommended by the
manufacturer may cause
fire, electric shock, or
injury.
Do Not sit or stand on the
Pump Sentry unit. Keep
children away!
Do Not place objects on the
Pump Sentry unit or allow
vents to become blocked.
Do Not smoke, use sparking
electrical devices, or allow
open flame near the unit
while working with it.
Do Not install Pump Sentry
in locations classified as
harzardous per N.E.C.
ANSI/NFPA 70 – 1984.
WARNING:
ELECTRICAL SHOCK
HAZARD
This unit has not been
evaluated for use outdoors.
Never operate Pump
Sentry outdoors.
Never operate Pump Sentry
with battery enclosure open.
Never operate Pump Sentry
in a wet location.
Never operate Pump Sentry
in a location where liquid or
moisture will come in
contact with, splash, or drip
into unit.
Do Not insert or allow
foreign objects to enter any
ventilation or exhaust
opening as this may cause
electrical shock and/or fire
hazard.