seca page 2 (2) PC configuration program
17.06.03- Wint/Rei 30-34-00-672 b
Standard case Connection to the existing display unit port.
The display can instead be connected to the second modular
socket of the service module.
DMS module with integrated display
08-06-18-082
If there is no modular socket on the back of the PCB,
retrofit one.
DETF module with integrated display
08-06-18-051
08-06-18-073
Pick off the signal directly from the PCB via the DETF LEM bus
cable.
• Once the cables have been correctly connected, start the scale.
• Start the software 'SERVA' from the programs menu.
• The 'Help'-menu of the 'SERVA'-program contains detailed instructions for available operations
To Next Page
Loading...
