Secabo C30III User Manual

OPERATING INSTRUCTIONS
for vinyl cutters
Secabo C30III, C60III and C120III
Congratulations on purchasing a Secabo vinyl cutter!
Please read these operating instructions thoroughly to ensure that you can start
production with your vinyl cutter without problems.
Reproduction of these operating instructions in any form requires written approval of
Secabo GmbH. We reserve all rights to change technical data and product features
without prior notice. Not liable for printing errors.
Secabo GmbH does not assume any liability for direct or indirect damage or injury
resulting from use of this product.
Version 3.1 (25.05.2010)

Secabo C30III Specifications

General

Interface	USB
Motor Type	Stepper motor
Repeatability	±0.1 mm
Frequency	50/60 Hz
Cutting Speed	1000 mm/s
Software Compatibility	Adobe Illustrator, CorelDRAW
Type of Cutter	Vinyl Cutter

Summary

Safety Precautions

Items Included

Stand-Up Base Layout

Unit Description

Unit Parts and Function

Identifies and explains the function of the main components of the vinyl cutter.

Side Views and Ports

Illustrates the side views of the unit, highlighting ports and connections.

Control Panel Overview

Control Panel Buttons and Display

Details the functions of each button and the LCD display on the control panel.

Starting Up Appliance and Software

FlexiStarter Software Installation

Step-by-step guide for installing the Secabo FlexiStarter cutting software.

USB Interface Connection

Instructions for connecting the vinyl cutter to the PC using a USB interface.

Serial Interface Connection

Initial Setup Checks

Essential checks and settings required before the first use of the vinyl cutter.

Starting Up the Vinyl Cutter

Blade Installation and Adjustment

Guide on how to install, adjust cutting depth, and replace the blade.

Blade Holder Insertion

Inserting Cutting Vinyl

Instructions on how to correctly insert vinyl material into the plotter.

Performing a Cutting Test

Cutting Test Procedure

How to perform a test cut to check blade adjustment and contact pressure.

Settings and Operation

Online and Offline Mode

Explanation of how to switch between online and offline modes for operation and settings.

Moving the Cutting Head

Instructions on how to move the cutting head and vinyl using arrow keys.

Setting the Zero Point

Procedure to set the starting point (zero point) for plotting operations.

Adjusting Settings During Operation

Repeat Job Function

How to repeat a previously sent job without re-transferring data.

Advanced Settings and Calibration

Limit Switches and Error Handling

How limit switches stop the cutting head and what to do after a reset.

LAPOS System

LAPOS Calibration Procedure

Step-by-step guide for calibrating the LAPOS system for contour cutting.

LAPOS Application Guide

Using the calibrated LAPOS system for contour cutting various objects.

Drag Knives

Drag Knives Handling and Maintenance

Guidelines for safe handling, storage, and maintenance of drag knives.

Technical Data

Troubleshooting Common Issues

Connectivity and Control Troubleshooting

Addresses common problems like connectivity loss after updates and unresponsive controls.

Output and Accuracy Troubleshooting

Covers issues like incorrect output size, repeated plotting, and zigzag cuts.

Statement of Conformity