EasyManua.ls Logo

Seco SYS-C31-DMV - Safety Pictograms Explained

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.12 of 23
Caution! It is strictly forbidden to modify the appliance in order not to compromise
the characteristics relating to the declared requirements.
Caution! Make sure that any part of the device cannot come in contact with an
unconscious, anaesthetized or incapacitated patient.
Warning! It is strictly forbidden to cover the device during operation.
Warning! Personnel training is a responsibility of the manufacturer of the device to
which the SYS-C31-DMV will be connected.
Warning! Do not mount the SYS-C31-DMV on machines containing other radio
modules.
Warning! Do not change the antenna of SYS-C31-DMV.
Warning! Install and use the device (antenna) more than 20 cm away from the human
body.
Warning! This equipment complies with FCC and ISED Canada (RSS-102) radiation
exposure limits set forth for extremity SAR and use in contact with it. The highest SAR
value when tested a separation distance of 20cm for extremity use is under the limits.
Warning! The integration of the SYS-C31-DMV in a finished product must be in
compliance with the following rules (reported on the appropriate US and Canadian
government databases, by searching for FCC ID or IC indicated above).
These rules provide in particular the obligation to:
- do not mount the SYS-C31 on machines containing other radio modules
- do not change the antenna
- install and use the device (antenna) more than 16.1 cm away from the human body
- do not install the product in such a way as to cover the labels.